Need help troubleshooting drive issue on Snorkel TB50
Oct 4, 2017 · On some brands that switch will automatically reverse the drive function if the unit swings past 90 degrees. If Snorkel is designed similar, I would check that switch isn't damaged or jamming up and that the wiring isn't shorted/open. Wouldn't hurt to check the joystick wiring to see that it isn't rubbed through or broken either.
Snorkel Lift TB 42 problem - Heavy Equipment Forums
May 27, 2012 · 7. Location. washington state. May 27, 2012. #1. I'm trying to get involved in the forum so this question is unrelated----I have a TB42 and the hi-idle and choke plunger silenoids quit stroking when actuated. The relay seems to be sending the signal and if I manually stroke the plunger back with the switch actuated it will stay in place.
Snorkel TB 60 no drive - Heavy Equipment Forums
Mar 13, 2014. #1. I have a 1999 Snorkel TB 60 with all hydraulic functions working EXCEPT drive, neither forward nor reverse is working. The last time I used this machine (2 weeks ago), everything was working fine and it is kept in a heated shop. I have been online and got copies of the parts breakdown manual, the troubleshooting guide and ...
TB 50 Snorkel control issues | Heavy Equipment Forums
Oct 7, 2023. #1. I have TB 50 Snorkel boom and I recently unloaded it and find the steering wasn’t working. The hydraulic fluid was a bit low so topped it off still no steering. Everything else seems to work as far as joysticks are concerned. Then I noticed that pushing the toggle in on the telescopic arm then the steering works with the ...
Help | Heavy Equipment Forums
Dec 10, 2023 · Have a A60 snorkelift 2.3 4 cylinder had to remove motor due to bad compression on 2 cylinders rebuilt it and reinstalled motor now wont fire getting 12 volts to coil but only getting 2.5 to crank sensor. pulled and checked wiring havent found no problems here r the modole no. for lift need a schematic if possible.tb-a60rf0 serial no.9528940895 ...
Trouble with Snorkel Lift - Heavy Equipment Forums
May 28, 2012 · 366. Location. WI. May 29, 2012. #2. Cummins had a similar problem with the fuel shut-off solenoid on their inline pumps. The solenoid actually has two coils, one high current to pull the lever back and one low current to hold the lever. There are three wires - pull back positive, hold positive and common ground.
2000 Snorkel Lift TB-50 - Deutz F3L-1011F - Heavy Equipment …
Sep 30, 2020 · Having several issues w/ a 2000 Snorkel Lift TB-50 w/ a Deutz F3L 1011F…. A) Incline Issue - The machine struggles w/ inclines, especially when attempting to load the machine onto a trailer for transport, and struggles w/ turning on inclines. An older TB-50 Snorkelift Ops Manual notes, when it comes to inclines: 1) use high rpm w/ low speed ...
Snorkel tb60 issues - Heavy Equipment Forums
Tennessee. Sep 4, 2019. #1. When you crank it throttle pulsates press pedal and doesnt throttle up. Everthing moves slowly. It's the ford motor duel gas fuel. Sent to a place they said throttle solenoid bad. Changed it then worked fine moved across parking lot blew the solenoid said bad wire somewhere.
Snorkel TB60 - Heavy Equipment Forums
Jun 20, 2021 · Hi all, I'm working on a snorkel tb60. I believe it is a 2001 but I can get an exact date/serial number if needed.
Snorkel Man Lift, no start | Heavy Equipment Forums
Nov 23, 2014. #1. I've got a Snorkel man lift with a Ford LRG-425i Engine, and when the weather is warm is seems to start and run fine. but now in the winter it won't start for anything, I was able to get it to start a few times by taking the coil out and putting it in the oven for 15 mins and then it would start with a shot of ether. so got a ...