The difference between case 1 and case 2 with open circuit output lies in whether the output capacitance is large or small. How to determine whether the output capacitance is large or small, and is ...
As the title says, when executing the VIDEO branch of the kmscube use case, the output gstbuf from the decoder module may not be a dma buf. To reproduce this, add the following print statement to the ...
Schematic access link: https://www.ti.com.cn/cn/lit/zip/sprr466，the pcb name of the board is PROC154E3, we changed the order of the GPIOs on the expander based on ...
My customer is using an MCU as host of CC2642 to download image to it. In a particular case, for example CC2642 flash is not empty but ROM bootloader is not enabled, the MCU cannot access the ROM ...
Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...
We are testing the BQ25172 linear NiMH Battery Charger on our new product in development. From our findings, when we set up a 1-Cell NiMH battery as the device to be charged and the BQ25172 (VSET) is ...
When trying to simulate the transient model in steady state mode with VOUT=5, I'm getting convergence errors everywhere. It works fine in startup mode (STEADY_STATE=0). Convergence errors happen with ...
I modified the configuration of a customer board based on the AM62x-evm, and the image and sdk can be successfully compiled through the command. $ MACHINE=am62xx-customer bitbake tisdk-customer-image ...
I don't see the option to select the option of flashing the chip address in the Promgramming Mode of the EEPROM in the GUI of the EVM, may I know how to use this tool to flash the chip address?Thank ...
I would like to ask a question because I need to get the spice model of TPS92512. I have downloaded TINA-TI and simulated this part but now I would like to transfer it into LTSpice. When I wnated to ...
The "EPWM_setCounterCompareValue(myEPWM0_BASE, EPWM_COUNTER_COMPARE_A, duty_value)" function is too slow to use at run time so I would like to know how to use the HWREG macro or any other method ...
I am reading back on the return I2S channel (in I2s, not TDM) data from the TAS6584-Q1 output channels. They read fine and make sense. The Vpredict on all four channels seems stable and relates across ...
Results that may be inaccessible to you are currently showing.
Hide inaccessible results
Feedback